{"id":5879,"date":"2017-02-04T19:22:04","date_gmt":"2017-02-04T16:22:04","guid":{"rendered":"http:\/\/graduatefarmer.co.ke\/?p=5879"},"modified":"2017-02-04T19:22:04","modified_gmt":"2017-02-04T16:22:04","slug":"get-to-know-about-irrigation","status":"publish","type":"post","link":"https:\/\/graduatefarmer.co.ke\/?p=5879","title":{"rendered":"Get to know about irrigation"},"content":{"rendered":"

Getting water to your crops in Kenya when they need it is both an art and a science, and doing it responsibly\u2014without wasting it or washing away valuable topsoil\u2014is part of the ethics of growing food. When designing an irrigation system, consider climate, soil type, the scale of your operation and the type of crops you\u2019re growing.<\/p><\/blockquote>\n

Assessing Need<\/h1>\n

Consider where you are along the spectrum between those two extremes and plan accordingly. If you live in a place in Kenya where rainfall usually occurs at least once per week, buckets, hoses and sprinklers may get you from one rain event to another and serve as a safety net during the occasional longer dry period. But if you end up needing to water multiple times per week, dragging hoses and buckets around will get old pretty fast. Instead, you\u2019ll want to consider installing something more permanent, efficient and automated.<\/p>\n

Infrastructure<\/h1>\n

Installing a permanent irrigation system in Kenya may be your biggest farm or garden expense. Your first choice should be whether you install pipes underground. It\u2019s more work (and expense) up front, but underground piping is not exposed to the rays of the sun, which degrade both plastic pipes and rubber hoses within a few years.<\/p>\n

However, it\u2019s easy to lose track of exactly where your underground pipes are, leaving them vulnerable to damage when you\u2019re tilling up a new area. Always make a map of where you lay pipes and bury them as deep as possible\u2014at least 18 inches for main supply lines and 9 inches for secondary lines.<\/p>\n

If you are a backyard grower or small-scale market gardener in an urban area e.g Nairobi, tapping into the municipal water supply is the easiest way to get started. Outdoor faucets are required by municipal codes to have a \u2018backflow prevention device\u2019 to keep irrigation water from mixing with drinking water, so any existing outdoor faucet should have this. If you\u2019re tapping into the main line between the street and the house, however, you\u2019ll need a licensed plumber to install this part for you.<\/p>\n

Using municipal water makes things easy, but if you\u2019re irrigating more than a quarter acre it gets pricey, and the available water pressure may limit how efficiently you can irrigate.<\/p>\n

Rural properties in Kenya with larger irrigation needs generally rely on well water, which means you\u2019ll likely need a storage tank and a pump. It\u2019s possible to use an on-demand pump to take the water straight from the ground and into the irrigation system, but only the best wells produce enough water for that to work. Instead, many irrigation systems pump water slowly from the well and store it in a tank for use when needed. Ideally the tank can be placed at the top of a hill to supply the irrigation system via gravity.<\/p>\n

Hardware<\/h1>\n

Installing a functional irrigation system takes plumbing skills and knowledge of your crops. There is no easy formula to figure out how to put it all together, but here is brief glossary of common components and their applications in irrigation design.<\/p>\n

Pumps<\/b> \u2013 centrifugal pumps are the most common and reliable type, but they shouldn\u2019t \u00a0be allowed to run dry or they will burn up. If you want to use solar power for your pump, using a DC (direct current) model greatly simplifies the wiring, though the output is much lower than an AC (alternating current) pump.<\/p>\n

Tanks <\/b>\u2013 polyethylene tanks are long-lasting, easy to install and economical for storing large volumes of water; ferro-cement tanks can be built by hand in more decorative shapes and are cheap (but labor intensive); pressure tanks, which create a constant pressure directly from a well (eliminating the need for a storage tank), are a common component of small-scale irrigation systems.<\/p>\n

Valves and Timers<\/b> \u2013 fully automated irrigation systems rely on a computerized timer to open irrigation valves according to a schedule. Timers are typically housed in a weatherproof box connected to a series of valves with low-voltage cable; the valves are located between the source of the water and the system of pipes that distributes it.<\/p>\n

Piping <\/b>\u2013 rigid PVC piping is the most common conduit for distributing water around a farm or garden. It needs to be buried to keep UV rays from degrading it, but can last for decades. Use it for all main irrigation supply lines.<\/p>\n

Tubing<\/b> \u2013 flexible polyethylene tubing is most often used for secondary lines off main PVC lines to deliver water to the plants in drip systems; it is resistant to degradation from UV rays, so it can be used aboveground and moved when needed.<\/p>\n

Pressure Regulators <\/b>\u2013 drip systems operate at relatively low pressures, so it\u2019s often necessary to install a pressure regulator to avoid blowing off the drip emitters. Sprinklers have relatively high pressure tolerances, but may also require a pressure regulator to function properly; pressure regulators are installed between the water source and the main supply line.<\/p>\n

Filters <\/b>\u2013 well water has particulates that can damage sprinklers and emitters, and even municipal water should be filtered before using in a drip system. If needed, filters are installed between the pressure regulator and the main supply line.<\/p>\n

Sprinklers <\/b>\u2013 sprinklers spray water into the air and are capable of covering a lot of ground for the cost involved. However, they are less efficient than drip emitters (some of the water is lost to evaporation or simply blows away in the wind) and many crops are prone to fungal diseases when their leaves are kept moist. Sprinklers may be supplied directly by PVC pipe, flexible poly tubing or with a garden hose.<\/p>\n

Drip Emitters <\/b>\u2013 designed to deliver water directly to the surface of the soil at the base of each plant, drip emitters make extremely efficient use of water, but are more costly and complex to install. They are usually supplied by poly tubing.<\/p>\n

Variables<\/h1>\n

The vast majority of food crops are satiated with an average of one inch of water per week during the growing season. That\u2019s equivalent to turning on the average sprinkler for about an hour. How often you actually need to irrigate depends on the crop. Tiny seedlings in 90-degree weather will need that inch divvied up into daily increments, while large established fruit and nut trees are fine with getting one deep soaking every three\u00a0or four\u00a0weeks. Berry bushes, herbs and more mature vegetable plants fall somewhere in between. Very little irrigation is needed if daytime temperatures stay below 65 degrees, but water requirements double for every 10\u00a0degrees above that, especially in sandy soil, which requires much more frequent irrigation than clay soil.<\/p>\n

Rather than worry about calculating all that, get in the habit of sticking your finger in the soil every day. If the top inch of soil is dry, it\u2019s time to water. Of course, some crops are more drought-tolerant than others and can tolerate dry soil to much greater depths for temporary periods. Figs, grapes, olives, lavender and other Mediterranean species are known for their high level of drought tolerance, for example. But by practicing general water conservation strategies, and building an irrigation system that delivers just the right amount of water exactly when plants need it, it\u2019s possible to ratchet down the water use of any food production system.<\/p>\n

via Mordern Farmer<\/p>\n","protected":false},"excerpt":{"rendered":"

Getting water to your crops in Kenya when they need it is both an art and a science, and doing it responsibly\u2014without wasting it or washing away valuable topsoil\u2014is part of the ethics of growing food. When designing an irrigation system, consider climate, soil type, the scale of your operation and the type of crops […]<\/p>\n","protected":false},"author":1,"featured_media":5881,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"rs_blank_template":"","rs_page_bg_color":"","slide_template_v7":"","page_builder":"","footnotes":""},"categories":[123],"tags":[664,874,1188,1198,1222,2005],"class_list":["post-5879","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-sustainable-farming","tag-crops","tag-farming-in-kenya","tag-irrigation","tag-irrigation-system","tag-kenya","tag-water"],"aioseo_notices":[],"aioseo_head":"\n\t\t\n\t\n\t\n\t\n\t\n\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t